4-wheel · plastic
Mobile Garbage Bin MGB 660 L
- Volume
- 660 l
- Payload
- 270 kg
- H × D × W
- 1230 × 772 × 1371 mm
BodyGreyBlue
Measuring drawing (PDF)Premium Quality · Made in Germany
Mobile garbage bins from 10 to 1100 litres direct from the manufacturer Weber in Haan: mobile large containers (MGB) with 4 wheels and 660, 770 or 1100 litres, 2-wheel wheelie bins from 60 to 360 litres, plus the MINI mobile garbage bin, litter bin, pre-sorting bin and containers for clinical waste – to EN 840, with a body in grey or blue.
For its plastic mobile garbage bins, Weber only uses special impact-resistant polyethylene (HDPE) from major suppliers. At the customer’s request, tested recycled material from used waste containers is used – up to 100 %; because the material is tested, quality variations of the finished products can be avoided. All raw materials have been tested for outdoor use and are sufficiently UV-stabilised. This allows the large containers to be used over an extremely wide temperature range from −40 °C to +80 °C.
Sustained quality and ruggedness of a container must prove themselves in practice. The manufacturer Weber optimises its products with this intent: sufficiently dimensioned wall thicknesses and an optimised design of the stressed areas ensure the ruggedness and long service life of Weber mobile garbage bins.
All mobile garbage bins are certified by an independent testing institute. Certification covers the criteria of the European standard EN 840 for mobile waste containers and the additional requirements of RAL GZ 951/1. Not only an initial sample is tested: the production of the large containers is regularly monitored so that series products also consistently meet the certified requirements. All mobile 2- and 4-wheel wheelie bins have been awarded the GS mark under the German Product Safety Act (ProdSG) without exception. It includes the testing and assessment of polycyclic aromatic hydrocarbons (PAH) according to AfPS GS 2019:01 PAK – a regulation of the German Committee for Product Safety (AfPS) that sets limits for these carcinogenic substances.
When selecting attachments, durability is the most important criterion. Adequate corrosion protection and weather resistance are tested thoroughly before a component is approved for production. Our suppliers implement this standard consistently and without compromise.
Mobile garbage bins overview
Mobile 4-wheel plastic containers – also known as mobile waste containers – for large volumes of waste in commerce and housing estates – with Flat Lid (FL), Flat Lid CLASSIC or Round Lid (RL), the 660, 770 and 1100 litre versions also with Lid in Lid (LiL). Body in grey or blue – the 1100 L Flat Lid (FL) in grey or brown –, lid in seven colours.
4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBrown
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)4-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)| Container | Volume (L) | Max. load (kg) | Weight (kg) | Version | Wheels Ø |
|---|---|---|---|---|---|
| Mobile Garbage Bin MGB 660 L | 660 | 270 | 37.6 | Standard | 160/200 mm |
| Mobile Garbage Bin MGB 660 L – Lid in Lid (LiL) | 660 | 270 | 38.0 | Lid in Lid (LiL) | 160/200 mm |
| Mobile Garbage Bin MGB 770 L | 770 | 310 | 41.0 | Standard | 160/200 mm |
| Mobile Garbage Bin MGB 770 L – Lid in Lid (LiL) | 770 | 310 | 41.4 | Lid in Lid (LiL) | 160/200 mm |
| Mobile Garbage Bin MGB 1100 L – Flat Lid (FL) | 1100 | 440 | 47.4 | Flat Lid (FL) | 200 mm |
| Mobile Garbage Bin MGB 1100 L – Flat Lid, Lid in Lid (FL, LiL) | 1100 | 440 | 48.4 | Flat Lid, Lid in Lid (FL, LiL) | 200 mm |
| Mobile Garbage Bin MGB 1100 L – Flat Lid (FL), CLASSIC | 1100 | 440 | 52.6 | Flat Lid (FL), CLASSIC | 200 mm |
| Mobile Garbage Bin MGB 1100 L – Round Lid (RL) | 1100 | 440 | 62.2 | Round Lid (RL) | 200 mm |
| Mobile Garbage Bin MGB 1100 L – Round Lid, Lid in Lid (RL, LiL) | 1100 | 440 | 61.0 | Round Lid, Lid in Lid (RL, LiL) | 200 mm |
Mobile 2-wheel plastic containers – also known as waste containers – for households, businesses and public facilities – body in grey or blue. Plus the MINI mobile garbage bin 0.4 L, a miniature of the MGB 240 L.
2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)2-wheel · plastic
BodyGreyBlue
Measuring drawing (PDF)Miniature of the MGB 240 L
BodyGreenBlue
The 50-litre litter bin for outdoor use and the 10-litre pre-sorting bin for separating waste where it is produced – body in green or blue.
Litter bin
BodyGreenBlue
Measuring drawing (PDF)Pre-sorting bin
BodyGreenBlue
Measuring drawing (PDF)For the proper disposal of clinical waste, we offer waste containers in the sizes 240 L, 360 L, 660 L, 770 L and 1100 L. They allow solid hazardous goods to be transported and stored. The yellow clinical waste containers have ADR approval ADR/RID UN type 4H2 for packing groups II and III, e.g. for clinical waste of category B; in orange and red they are identical in construction, without ADR approval. The containers are liquid-tight, lockable and marked with UN 3291 for (bio)medical waste (n.o.s.).
2-wheel · clinical waste
ColourYellowOrangeRed
Measuring drawing (PDF)2-wheel · clinical waste
ColourYellowOrangeRed
Measuring drawing (PDF)4-wheel · clinical waste
ColourYellowOrangeRed
Measuring drawing (PDF)4-wheel · clinical waste
ColourYellowOrangeRed
Measuring drawing (PDF)4-wheel · clinical waste
ColourYellowOrangeRed
Measuring drawing (PDF)Weber supplies all mobile garbage bins ex works Haan or worldwide by arrangement. Large customers receive a volume discount – simply enquire. Every container can be customised – with hot foil stamping, injection embossing, transfer printing or stickers, insertion apertures, chipnest according to EN 14803 and locking systems; more under options and accessories.
Net prices per unit plus VAT, ex works DE-42781 Haan (EXW), for business customers only (B2B). Price list of 16 Oct 2026, valid until 31 Dec 2031. All mobile garbage bins are in stock.
Other colours at other prices on request.
| Container | Grey body | Blue or brown body | Minimum order |
|---|---|---|---|
| MGB 660 L | €199.43 | €205.41 | minimum 1 unit |
| MGB 660 L – Lid in Lid (LiL) | €209.43 | €215.71 | minimum 1 unit |
| MGB 770 L | €211.58 | €217.93 | minimum 1 unit |
| MGB 770 L – Lid in Lid (LiL) | €221.58 | €228.23 | minimum 1 unit |
| MGB 1100 L – Flat Lid (FL) | €279.60 | €287.99 (brown) | minimum 1 unit |
| MGB 1100 L – Flat Lid, Lid in Lid (FL, LiL) | €288.20 | €296.85 | minimum 1 unit |
| MGB 1100 L – Flat Lid (FL), CLASSIC | €298.25 | €307.20 | minimum 1 unit |
| MGB 1100 L – Round Lid, Lid in Lid (RL, LiL) | €368.35 | €379.40 | minimum 1 unit |
| MGB 1100 L – Round Lid (RL) | €358.35 | €369.10 | minimum 1 unit |
| Container | Grey body | Blue body | Minimum order |
|---|---|---|---|
| MGB 360 L | €86.78 | €89.38 | minimum 5 units |
| MGB 240 L | €51.93 | €53.49 | minimum 5 units |
| MGB 180 L | €47.06 | €48.47 | minimum 5 units |
| MGB 140 L | €45.36 | €46.72 | minimum 5 units |
| MGB 120 L | €37.84 | €38.98 | minimum 5 units |
| MGB 80 L | €36.80 | €37.90 | minimum 5 units |
| MGB 60 L | €35.60 | €36.67 | minimum 5 units |
Body green or blue.
| Container | Green body | Blue body | Minimum order |
|---|---|---|---|
| MINI Mobile Garbage Bin 0.4 L | €3.15 | €3.31 | minimum 10 units |
| Litter Bin 50 L | €56.20 | €59.01 | minimum 5 units |
| Pre-sorting Bin 10 L | €6.80 | €7.14 | minimum 10 units |
Yellow with ADR approval (ADR/RID UN type 4H2, packing groups II and III); orange and red identical in construction without ADR approval.
| Container | Yellow (ADR) | Orange (no ADR) | Red (no ADR) | Minimum order |
|---|---|---|---|---|
| Clinical Waste Container MGB 240 L | €86.93 | €88.67 | €89.54 | minimum 10 units |
| Clinical Waste Container MGB 360 L | €121.78 | €124.22 | €125.43 | minimum 10 units |
| Clinical Waste Container MGB 660 L | €234.43 | €239.12 | €241.46 | minimum 5 units |
| Clinical Waste Container MGB 770 L | €246.58 | €251.51 | €253.98 | minimum 5 units |
| Clinical Waste Container MGB 1100 L – Flat Lid (FL), CLASSIC | €333.25 | €339.92 | €343.25 | minimum 5 units |
All containers are manufactured by Abfallbehälter & Container Weber GmbH & Co. KG, founded in 1969, by injection moulding from HDPE at its site in Haan, North Rhine-Westphalia, Germany. Spare parts are available for all models; all dimensions and drawings can be found in the overview.
Which mobile garbage bin is right, how heavy may it be when full and what applies at the storage area? Here we answer the most frequently asked questions about wheelie bins and waste containers – concise and easy to understand.
MGB 660 L and 770 L (also with Lid in Lid) and 1100 L with Flat Lid (FL), Flat Lid with Lid in Lid (FL, LiL), Round Lid (RL), Round Lid with Lid in Lid (RL, LiL) and 1100 L Flat Lid (FL), CLASSIC.
“C” or CLASSIC stands for the Flat Lid Classic version (1100 L). The term Classic refers to waste containers with increased wall thickness: Weber’s plastic containers of the “Classic” series with 1100 L, 240 L and 360 L are particularly stable, resistant and resilient and are especially suitable for food waste, even in the event of possible overloading.
All three sizes are practically the same width at around 1,370 mm (including lifting trunnions); they differ in height and depth: 660 L measures 1,230 × 772 mm (H × D), 770 L 1,316 × 779 mm and 1,100 L with flat lid 1,330 × 1,065 mm. 660 and 770 litres are therefore only just under 780 mm deep and fit into narrow, shallow bin rooms; with a depth of 1,065 mm, 1,100 litres offers the most volume per space.
Both have a nominal capacity of 1,100 litres with a nominal load of 440 kg. The curved round lid lets water and snow run off well, but at 1,460 mm the container is taller and, at approx. 62 kg, heavier than the flat lid version (1,330 mm, approx. 47 kg). More equipment is available for the flat lid, such as bottle and brush apertures, Ochsner pick-up or forklift pockets.
The decisive factor is the nominal load according to EN 840, which is about 0.4 kg per litre of volume. At Weber: 60 and 80 L 40 kg each, 120 L 48 kg, 140 L 56 kg, 180 L 72 kg, 240 L 96 kg, 360 L 144 kg, 660 L 270 kg, 770 L 310 kg and 1,100 L 440 kg. Municipalities may set lower limits. Overloaded bins can be damaged when emptied or are left standing and may not be emptied.
Determine the weekly amount of waste per fraction in litres, divide it by the number of collections per week and add a 10–20 % reserve. For housing estates, municipal guide values in litres per person and week help. The measuring drawings can then be used to check how many containers fit on the bin storage area.
That depends on the sack size. As a rough rule of thumb, about two large sacks fit into a 120-litre bin, three to four into a 240-litre bin, five to seven into a 360-litre bin and about 12 to 19 into a 1,100-litre container; 660 and 770 litres hold correspondingly fewer. Loosely filled waste uses the space better than bulging sacks. What matters is that the lid closes completely.
The nominal volume is the standardised value after which a bin is named, for example 240 or 1,100 litres. In practice there are tolerances; municipal specifications state, for example, 240 l with +15/−5 litres. The actual capacity with the lid closed can therefore be slightly above or below the nominal value. For fees, tenders and planning, the nominal volume counts.
With comb lifting, a comb on the vehicle engages under the comb bar on the rim of the container; it is standard for 2-wheel bins and is also used for 4-wheel containers. With trunnion lifting, lifting arms engage the lateral lifting trunnions (DIN trunnions according to EN 1501-5), typical for 4-wheel containers. Many vehicles have combined lifters; which pick-up a container needs depends on the collection vehicles used locally.
Plastic containers made of HDPE are lighter, corrosion-free, quieter when emptied and easy to clean; a Weber 1,100-litre flat lid container weighs approx. 47 kg. Metal containers made of galvanised steel show their strength where there is heat or an increased fire risk, for example with ash. For most types of waste, plastic is the standard today.
The storage area should be level, paved, well lit and accessible without steps, with transport routes to the collection vehicle as short as possible. In Germany, the requirements of the statutory accident insurance (DGUV) and the state building regulations must be observed, among others, as well as fire safety distances to buildings. For 4-wheel containers, plan for the full width including lifting trunnions and always secure them on slopes with a wheel stop or central stop.
Containers that only authorised persons can access have proven effective: a lockable lid in lid allows small quantities to be inserted while the main lid stays locked and only opens during emptying. Enclosed, lockable storage areas or waste locks keep outsiders away completely. Clear labelling of the fractions and good lighting also reduce incorrect disposal.
A waste lock is a lockable insertion chute on or at a large container, usually for 660 to 1,100 litres. Residents open it with a chip card or code and insert a limited amount; the system records every insertion. This allows costs to be charged according to the polluter-pays principle and prevents unauthorised dumping, typically in large housing estates.
In Germany, the costs of waste disposal are part of the apportionable service charges under the Operating Costs Ordinance (Betriebskostenverordnung). Unless otherwise agreed in the tenancy agreement, they are generally distributed according to living space. Allocation becomes fairer with waste locks or chip and weighing systems, where each household pays only for the amount it actually disposes of.
Yes. Large 4-wheel containers can become dangerous if children climb in and the lid falls shut. A child safety lock or a lid lock prevents opening by unauthorised persons; Weber, for example, supplies a child safety lock as a spare part for the 1,100-litre round lid container with lid in lid. Containers at schools, nurseries and playgrounds should always be lockable.
Glass is heavy. A 1,100-litre container is designed for a nominal load of 440 kg according to EN 840, which can quickly be reached with glass; smaller containers or shorter emptying intervals are therefore often chosen for pure glass fractions. Round insertion apertures, on 4-wheel containers also double ones, ensure that only bottles and jars get inside.
A compactor compresses dry waste such as cardboard or foil many times over and saves space and collections. It is typically worthwhile for large, consistent quantities, for example in supermarkets, logistics centres or production plants. For mixed, wet or smaller quantities, mobile large containers remain more flexible; often both are combined by emptying the containers into the compactor using a tipping device.
Weber 4-wheel mobile garbage bins: injection moulded from HDPE on machines with up to 6,000 t clamping force in Haan, spare parts for all models. Standards and testing: quality & certificates.