Mobile waste containers MGB 1100 litre round lid, lid-in-lid from Weber

Mobile waste containers MGB 1100 L RL LIL

  • Nominal volume 1100 L
  • Nominal loading capacity 440 kg

manufactured in accordance with DIN EN 840 (Parts 3, 5 and 6) and RAL GZ 951/1

high-quality, high-density polyethylene (HDPE)

UV stabilised; resistant to frost, heat and chemicals

suitable for both DIN and comb-lifting devices (form A according to EN 840-3)

200 mm diameter quiet-running, solid rubber castors with 360° swivel range

standard equipment features 2 x wheel stops (double-stop); also available with central braking

all metal parts are zinc plated and thus corrosion-resistant

easy-to-move, spring-supported sliding lid, lockable

the lid is attached to the body with high-strength polyamide hinges; corrosion-protected metal springs keep the lid closed

easy filling through additional smaller lid

can be easily manoeuvred using the side handles on the bin

features a standard 2-inch water drain including drain plug

all usual colours and combinations (e.g. grey, blue or green) available

Mobile waste containers MGB 1100 litre round lid, lid-in-lid (lil) from Weber in detail:

Dimensional drawing mobile waste containers
Image gallery: mobile waste containers
Options for mobile waste containers
mobile waste containers 1100 L Dimensional drawing

Dimensional drawing

Sizes, dimensions and measures of the mobile waste containers 1100 L RL LIL

mobile waste containers 1100 L RL LIL Dimensional drawing
Image gallery: mobile waste containers

Image gallery

Image gallery: mobile waste containers 1100 L RL LIL

Mobile waste containers 1100 L RL LIL

The four 4 wheeled mobile waste containers, with roll top, have been developed in accordance with EN 840 Parts 3, 5 and 6. In addition, the mobile waste containers are marked with the GS symbol in accordance with ProdSG, as well as the appropriate noise level mark and the CE symbol. The four 4 wheeled recycling containers depicted here is equipped with a central braking system, available at an extra charge.

Additional smaller lid

The four 4 wheeled refuse bins feature a practical smaller lid within the main lid. (Lid in lid system) Filling the roll top mobile waste containers with waste through the additional lid of the roll top is easy and convenient, even for children and elderly persons. Large and bulky waste can simply be dropped in by sliding the main lid to the rear.

Additional/sliding lid

The four 4 wheeled dustbins, designed for outdoor use, can be filled by either opening the additional smaller lid or by sliding back the main lid. The easy-to-move, spring-supported lid of the commercial waste containers with sliding lid can be locked in three positions.

Hinge of the additional lid

The additional lid of the four 4 wheeled domestic waste bins is attached to the main lid with two hinges. The additional lid of the roll top recycling containers, designed for outdoor use, can be easily replaced, for example, when changing waste/recycling fractions.

Travelling gear with footbrakes

The standard equipment of our four 4 wheeled recycling bins is an easy-to-use footbrake system (double-stop). By depressing the two brake pedals of the mobile waste containers, the swivel rings and brakes can be locked independently of each other.

Mobile waste containers with dome lid (round lid) and lid in lid are perfect for your waste disposal. Have a look at our 4 wheeled bins!

optionen

Options

Options for the mobile waste containers 1100 L RL LIL

The following special equipment is available at a surcharge:

Lifting trunnions with safety stopper

Our plastic four 4 wheeled recycling bins can be fitted with lifting trunnions (for DIN devices) in accordance with EN 1501-5. The trunnions of mobile waste containers are reinforced with steel insert and can be supplemented with safety stoppers, if required.

Side handles

The stable side handles are the perfect solution for improving the manoeuvrability and ease of lifting of our four 4 wheeled mobile waste containers. The ergonomic handles are in accordance with EN 840-2. If you wish to have your mobile garbage bins with a central braking system, the side handles are incorporated as standard.

Travelling gear with central braking

As an option, the mobile garbage bins/trash cans, with lid in lid, can be supplied with a central braking system. The pedal of the central braking system is located at the right side of the waste container. By depressing the pedal of the mobile waste containers, the swivel rings and brakes of the two front wheels will be locked. You can easily unlock the system by inserting a triangular key into the right side handle of your mobile garbage bins.

Fixture for padlock

The four 4 wheeled trade waste containers are equipped with a fixture for a padlock. This allows the main lid to be secured against unauthorised opening. The padlock is not included in the scope of delivery.

Steering locks (directional locks)

The castors on our roll top refuse bins can also be fitted with steering locks. Two castors are fitted with the locks leaving the other two castors to swivel freely.

Marking with hot-foil printing

Customised and permanent marking of our mobile waste containers is available at a surcharge. Our commercial waste containers can be hot-foil printed in a single colour on the lid and/or on the body.

In addition, the following options are available at a surcharge:

  • Wheel variations for special applications

  • Manual lid locking devices

  • Foot pedal lid opener

  • Towing kit

mobile waste containers 1100 L RL LIL Spare parts

Spare parts

Spare parts mobile waste containers 1100 L RL LIL

Send product enquiry

Product enquiry

Product enquiry mobile waste containers 1100 L RL LIL

All information on the engineering design of products in the form of drawings, weights and/or tables is always approximate. No liability is assumed for design-related variations of the products compared to drawings, illustrations or other descriptions.