Certified Recycling Bins & Recycling Containers – EN 840 · GS Mark · ISO 9001
Certified recycling bins from Weber: tested to EN 840, with GS mark (AfPS GS 2019:01 PAK) and to the requirements of RAL GZ 951/1 – EN 840 testing continuously in-house and annually by an accredited external test institute.
Weber recycling bins & waste containers – 10 to 1100 litres, 2-wheeled and 4-wheeled. HDPE, EN 840, GS mark, Blue Angel. Manufactured exclusively in Haan, Germany.
Waste Containers & Wheelie Bins – Complete Range | Weber GmbH & Co. KG
Weber Recycling Bins
To manufacture plastic recycling bins, WEBER uses only special, impact-resistant polyethylene (HDPE) from renowned suppliers. At the customer's request, tested recycled material from used waste containers is used. All raw materials are tested for outdoor use and sufficiently UV-stabilised. Suitable for use in a temperature range of −40 °C to +80 °C.
Optimised design for many years of use: Adequately dimensioned wall thicknesses and an optimised design ensure the robustness and durability of WEBER large waste containers.
When selecting the fittings, durability is the most important criterion. Adequate corrosion protection and weather resistance are thoroughly tested.
Certified Mobile Recycling Bins & Waste Containers
Certified mobile 2- and 4-wheeled recycling bins with guaranteed quality – all certified by an independent testing institute. EN 840. Not just type samples – series production is continuously monitored.
The German GS mark has been granted, without exception, for all mobile 2- and 4-wheeled wheelie bins. The regulations include compliance with AfPS GS 2019:01 PAK.
High-quality recycling bins & waste containers – direct from the manufacturer Huge selection! Request information material →
European standard for 2- and 4-wheeled waste containers
GS Mark
Tested safety including PAH testing AfPS GS 2019:01 PAK
CE Mark
Directive 2000/14/EC · sound power level LWA
ISO 9001
Quality management – Haan production organisation
ISO 14001
Environmental management – Haan site
ISO 45001
Occupational health & safety – Haan site (certified 2024)
ISO 50001
Energy management – Haan site
The Blue Angel
State ecolabel · Green procurement DE/EU
ADR Approval
Clinical waste containers 240–1100 L · ADR/RID type 4H2
HDPE Material – Technical Properties
Weber recycling bins & waste containers are manufactured from high-molecular, impact-resistant HDPE (high-density polyethylene) from renowned raw material suppliers. UV-stabilised, proven for −40 °C to +80 °C. All dimensions and technical dimension drawings are available on request.
Tested recycled HDPE from used containers is available on request. PAH testing according to AfPS GS 2019:01 PAK.
Temperature
−40 °C to +80 °C
Material
HDPE
UV Stability
Full
Process
Injection moulding
Production
Haan, Germany
Recycling
100 % recyclable
PAH Testing
AfPS GS 2019:01 PAK
Chemicals
Resistant
Frequently Asked Questions
Recycling Bins & Waste Containers – FAQ
EN 840 is the binding European standard for 2- and 4-wheeled mobile waste and recycling containers. Weber regularly tests ongoing production batches internally. External production inspections are carried out annually by an accredited testing institute.
The GS mark (Geprüfte Sicherheit – tested safety) includes testing according to the state of the art, including testing for polycyclic aromatic hydrocarbons according to AfPS GS 2019:01 PAK. All mobile Weber recycling bins and waste containers carry the GS mark without exception.
Weber uses impact-resistant HDPE from renowned suppliers. UV-stabilised, −40 °C to +80 °C. Recycled HDPE is also available on request.
10, 50, 60, 80, 120, 140, 180, 240, 360, 660, 770 and 1100 litres. 2-wheeled (60–360 L) and 4-wheeled (660–1100 L). Clinical waste containers UN 3291: 240–1100 L.
The CE mark confirms conformity with EU Directive 2000/14/EC on noise emission. For mobile recycling bins & waste containers, the sound power level LWA is measured and documented.
ISO 9001 is the international standard for quality management systems. It ensures that all production processes at the Haan site are systematically planned, monitored and continuously improved. For the buyer, this means consistently high quality in every Weber recycling bin and waste container.
ISO 14001 certifies the environmental management system of the Weber plant in Haan. It proves that the environmental impact of production is systematically recorded, minimised and continuously improved – from the procurement of raw materials to the manufacture of recycling bins and waste containers.
ISO 45001 is the international standard for occupational health and safety management systems. Weber was certified to ISO 45001 in 2024. The standard proves that the health and safety of employees at the Haan production site are systematically protected – a sign of responsible corporate management.
ISO 50001 certifies the energy management system at the Haan site. It obliges Weber to systematically record and reduce energy consumption in the production of recycling bins and waste containers – an active contribution to climate protection and the conservation of resources.
The Blue Angel is Germany's oldest and best-known ecolabel, defined and awarded by the Federal Environment Ministry. Weber recycling bins & waste containers with the Blue Angel meet particularly strict requirements for recyclability, freedom from pollutants and a minimum of 80 % post-consumer recycled content in the plastic parts. The label is relevant for environmentally oriented procurement (green procurement) by German and European authorities and waste management companies.
UN 3291 is the UN dangerous goods number for clinical waste (infectious substances). Weber clinical waste containers (240–1100 L) are approved under ADR/RID as packaging type 4H2: lockable, leak-proof and certified for the safe transport of medical waste of classes II & III. They meet the requirements of hospitals, medical practices and healthcare facilities.
Our containers are approved under ADR/RID as packaging type 4H2 for packaging classes II & III. They can therefore be used for a range of waste fractions that may not be stored and transported in untested containers. Colours and labelling can be produced to customer specifications. In addition, the container bears the ADR/RID approval number.
Directive 2000/14/EC (noise emission) and the requirements of RAL GZ 951/1 – extended requirements for the manufacture of waste containers to EN 840.
To all mobile containers (MGB 60–1100 L). The 10 L pre-sorting bin, the 50 L litter bin and the mini wheelie bin are not covered by EN 840.
Certified Recycling Bins & Waste Containers – Weber GmbH | EN 840 · GS Mark · ISO 9001
Weber Recycling Bins & Waste Containers – EN 840, GS Mark, ISO 9001 · Made in Germany
All mobile Weber recycling bins and waste containers are manufactured in accordance with EN 840 and carry the GS mark. 2-wheeled waste bins (60–360 L) and 4-wheeled recycling bins (660–1100 L) – produced exclusively in Haan, Germany. ISO 9001, ISO 14001, ISO 45001, ISO 50001. Clinical waste containers UN 3291 with ADR approval.
